Características
The SB4 stainless steel, single-ended beam load cell is designed for multiple-cell applications such as floor scales and tank, bin and hopper weighing systems. It is used exclusively in Rice Lake Weighing Systems’ Paramounts® HS mounting systems. Millivolt/volt/ohm factory calibration assures matched outputs for easy calibration. It features true hermetic sealing of both the strain gauge area and the cable entry, providing the ultimate in protection from outside elements. Exclusive field-replaceable load cell cable simplifies cable and load cell repairs. NTEP Certified capacities range from 1,125 to 11,250 pounds (5 to 50 kilonewtons/510.3 to 5102.9 kilograms). Non-NTEP Certified capacity: 22,500 lbs (100 kilonewton/10,205.8 kilograms).
Descripción
Full Scale Output:
2.0 mV/V±.07%**
Output Resistance:
1000 ohms +/- 2
Input Resistance:
1100 ohms +/- 50
Material/Finish:
Stainless steel
Temperature:
Compensated range
14°F to 104°F/-10°C to 40°C
Safe Overload:
200% Full scale
Safe Sideload:
100% Full scale
Rated Excitation:
10 V DC (15 V maximum)
Nonlinearity:
0 to -0.03% Full scale
Hysteresis:
0 to +0.05% Full scale
Combined Effect of Nonlinearity
and Hysteresis:
±.03% Full scale
Insulation Resistance:
10,000 megohms
Deflection at Capacity:
2250 lb=.012 in/.3.1 mm,
5200 lb=.02 in/.5 mm,
11,250 lb=.012 in/.3.1 mm,
22,500 lb=.016 in/.4 mm
Seal Type:
Hermetically sealed, IP69K
Cable Length:
225-5200 lb=10 ft/3.1 m
11,250-22,500 lb=15 ft/4.6 m
Cable Diameter:
.196 polyurethane jacket
Cable Color Code:
Green………………….+ Excitation
Black…………………..– Excitation
White …………………….+ Signal
Red ………………….– Signal
Yellow …………………. Shield
Warranty:
One-year limited warranty
Approvals:
FM
NTEP
OIML (Available upon request)
CE