Características
- NEMA Type 4X/IP66
- 304 stainless steel construction
- Large, bold 0.8 in light emitting diode (LED) display
- Status annunciators: lb, kg, oz, g, negative, motion, center of zero
- 1 full-duplex RS-232 port
- 2 digital inputs for remote zero, print and units
- 12 in column, attachment bracket or tilt stand for table, wall or under counter mounting
- Aluminum, single-point load cell
- Overload and upload stops on scale base
- Stainless steel, non-tactile feel, piezo zero and units buttons
- Unit of measure: kg, gm, lb, oz, lb/oz (lb/oz is not Legal for Trade)
- PreVent™ breather vent
- Spring-loaded platform
Descripción
This special 2100 model is enhanced with a four-point spring plate suspension, to minimize shock and overload damage. For increased durability, the 2100SL is an economical and durable checkweigher.
Especificaciones
Line Voltages:
115 or 230 VAC
Frequency:
50 or 60 Hz
Power Consumption:
70 mA at 115 VAC (8 W)
35 mA at 230 VAC (8 W)
Display Resolution:
10,000 dd
Digital Inputs:
2 inputs, TTL or switch closure, active-low
Digital Filter:
Software selectable
Serial Communications:
Full-duplex RS-232; 9600, 4800, 2400, 1200 bps; 7 or 8 data bits; even,
odd or no parity
Display:
6-digit light emitting diode (LED) display. 7-segment, 0.8 in (20 mm) digits
LED Annunciators:
Negative value, center of zero, motion, kg, g, lb, oz
Keypad:
2 stainless steel piezo switches
Operating Temperature:
14° F to 104° F (-10° C to 40° C)
Rating/Material:
NEMA Type 4X/IP66, stainless steel
Warranty:
Two-year limited warranty
Approvals:
Indicator: NTEP CC 00-045 Class III/IIIL 10,000 d
Measurement Canada, AM-5374;
UL and C-UL listed
Base: NTEP CC 95-072, Class III 5,000 d