IQ plus® 2100 Digital Bench Scale

Características

  • NEMA Type 4X/IP66
  • 304 stainless steel construction
  • Large, bold 0.8 in light emitting diode (LED) display
  • Status annunciators: lb, kg, oz, g, negative, motion, center of zero
  • 1 full-duplex RS-232 port
  • 2 digital inputs for remote zero, print and units
  • 12 in column, attachment bracket or tilt stand for table, wall or under counter mounting
  • Aluminum, single-point load cell
  • Overload and upload stops on scale base
  • Stainless steel, non-tactile feel, piezo zero and units buttons
  • Unit of measure: kg, gm, lb, oz, lb/oz (lb/oz is not Legal for Trade)
  • PreVent™ breather vent
  • Meets USDA requirements



Descripción

The IQ plus® 2100 digital bench scale is ideal for use in general purpose weighing, portioning, and a variety of food processing applications. Stainless steel buttons repel messy ingredient spills and damage by knife point, while the NEMA Type 4X stainless steel indicator enclosure stands up to frequent washdowns. Standard overload stops protect the base during heavy use. All operations are controlled through two buttons—zero and units. Push-button zero and a full range of units, including lb/oz, offer the flexibility needed for a wide variety of applications.



Especificaciones

Line Voltages:
115 or 230 VAC
Frequency:
50 or 60 Hz
Power Consumption:
70 mA at 115 VAC (8 W)
35 mA at 230 VAC (8 W)
Display Resolution:
10,000 dd
Digital Inputs:
2 inputs, TTL or switch closure, active-low

Digital Filter:
Software selectable
Serial Communications:
Full-duplex RS-232; 9600, 4800, 2400, 1200 bps; 7 or 8 data bits; even, odd or no parity
Display: 
6-digit light emitting diode (LED) display. 7-segment, 0.8 in (20 mm) digits
LED Annunciators:
Negative value, center of zero, motion, kg, g, lb, oz
Keypad:
2 stainless steel piezo switches
Operating Temperature:
14° F to 104° F (-10° C to 40° C)

Rating/Material:
NEMA Type 4X/IP66, stainless steel
Warranty:
Two-year limited warranty
Approvals:
Indicator: NTEP CC 00-045 Class III/IIIL 10,000 d
Measurement Canada AM-5374;
UL and C-UL listed
Base: NTEP CC 95-072, Class III 5,000 d