Características
• Fiberglass Reinforced Polyester (FRP), NEMA Type 4X enclosure with stainless steel cover screws
• Jumpers to enable trimming
• PreVent™ breather vent
• Conformal coated circuit board
• Number of cells: 2, 3 or 4 single cells
• Expansion port
Descripción
The JB4EP TuffSeal™ excitation trim junction box sums two or four single load cell outputs with the potential to expand through the included expansion port. The Fiberglass Reinforced Polyester (FRP), NEMA Type 4X enclosure is optimal protection against harsh environments. Optimal JB4EP TuffSeal applications include tank and hopper scale configurations.
Especificaciones
Cable Fittings:
(4) PG7 0.118-0.255 strain relief
(2) PG11 0.197-0.394 strain relief
(1) PreVent™ breather vent
Enclosure:
Molded FRP (NEMA Type 4X) enclosure with overlapping solid cover, stainless steel screws
Connectors:
Spring clamp screwless, 12-28 AWG
Trimming:
Individual cell, excitation trim
Potentiometers:
100 ohm, 25 turn cermet
Circuit Board:
3.8 in x 2.3 in (96.5 mm x 58.4 mm),
with conformal coating
Warranty:
One-year limited warranty